Intelligent Lighting Control System, dimmer light, dimmable lamps, led dimmer downlith, led dimmer c

Price: 1
Brand Name:
Model Number:
Country/Region: China
Post Date: Mar 14,2012

Product Description: Intelligent Lighting Control System, dimmer light, dimmable lamps, led dimmer downlith, led dimmer c


Features
1. Input DC 24V, output 350mA or 700mA
2. Each driver can drive 1-6pcs 1W or 3W LED in series.
3. Many drivers can be connected with each other with signal wire
4. All the lights can be dimmed or turned on/off by wall switch or remote controller

Operation Guide


Control Lights Through Wall Switch
1. Turn left, increase the brightness
2. Turn right, reduce the brightness
3. press downwards, turn on/off the lights

Control Lights Through Remote Controller QS-IT-C1

Infrared sensor is on the wall switch, the remote controller should be pointed to the wall switch
Control lights without setting group number
If there is only one group of lights in one room, it is not necessary to set group number.
When we control the lights, choose "0" as group number
Set Group NumberSet through remote controller during installation
Switch on power, keep pressing the red button on the driver, PressIP, choose a group number
from 1-9, A-F(totally 15 groups are available), press "S1" to save setup.
When setting group number, "0" can not be used as group number. But after setup is finished,
we can choose "0" to control all lights syschronously. When we control the lights, "0" can
represents all the 15 groups.
Adjust BrightnessTake group "D" for example
Method 1Press IP, press D, press ,
Method 2PressIP, pressD, press C1, C2, C3, C4 to choose brightness preset
by manufacturer
Method 3PressIP, pressD, press B1, B2, B3, B4to choose brightness preset
by user
If choose "0" instead of "D", all the lights in different groups change synchronously
How to set the brightness value for B1, B2, B3, B4
TakeB1for example
PressB1, PressBR, input brightness valueamong 01-99, pressS2to save setup

ON/OFFTake group "D" for example
PressIP, pressDor "0", press ON/OFF to turn on/off the lights
If choose "0", all the lights in different groups will get on/off
Timing OFFTake group "D" for example
PressIP, pressD, press "TM", input timeamong 0010-2359),press "OK" to save setup. If
the input time is 0030, the lights in group "D" will get off 30 minutes later

Control Lights Through Remote Controller QS-IT-C2

If there is one group of lights in one room, it is convenient to use QS-IT-C2
Adjust Brightness
Method 1through,
Method 2choose brightness throughC1, C2, C3, C4preset by manufacturer
Method 3choose brightness through B1, B2, B3, B4preset by user
How to set the brightness value for B1, B2, B3, B4
TakeB1for example
PressB1, PressBR, input brightness valueamong 01-99, pressS2to save setup
permanently

Supplier Details:

Quality Led Co., Ltd.

Sales:Ms. Emma Tang

Contact Phone:86-755-23467191

Main Products:LED Bulbs & Tubes

Business type:Manufacturer

SPONSOR AD

User Reviews: Intelligent Lighting Control System, dimmer light, dimmable lamps, led dimmer downlith, led dimmer c