CNC Router/Milling kit 5 axis Two-Phase Stepper Motor Driver + 6 axis CNC interface board #UC120

Price: 1
Brand Name: RANTION
Model Number: UC180
Country/Region: China
Post Date: Mar 07,2012

Product Description: CNC Router/Milling kit 5 axis Two-Phase Stepper Motor Driver + 6 axis CNC interface board #UC120


 

 

CNC Router/Milling kit 5 axis Two-Phase Stepper Motor Driver + 6 axis CNC interface board

 

Description of Two-Phase Stepper Motor Driver :

 

International Buyers - Please Note:

  - Import duties,taxes and charges are not included in the item price or shipping charges.These charges are the buyer responsibility

  - Please check with your country customs office to determine what these additional costs will be prior to bidding/ buying.

 

DC12-36V power supply;
Output current from 0.5A to 5A , can be adjusted , the maximum current per phase is 5A;
Adopts the constant flow temporary wave double H bridge and the PWM to adjust the phase current , making driver more stable;
4 resolution: 1, 1/2 , 1/4 , 1/16;
EN control signal;
500Kpps input signal is optical isolated , the max pulse response is 500Kpps;
Cross-fault phase protection and over-current protection;

 

the characteristics of CNC Router Interface board:

1, To provide twelve Road OC (open collector mode set) output, optical isolation Rd common ground input.

2, Dual power supply, easy connection of isolated power supply for the optical isolation circuit to provide independent power supply of non-common ground to achieve complete isolation before and after class, isolated terminal voltage 5 - 12VDC (other voltages to be customized).

3, Can be a single +5 v power supply, no power output.

4, The computer parallel port output signal by the Schmitt trigger all the plastic and improve the digital signal transmission interference.

5, Can be used with the parallel port control software for industrial control applications.

6, Support KCAM4, MACH, EMC and other parallel class of CNC control software, supports up to 6 axis.

7, With all the step pulse and direction signals, supporting the use of servo drives, control lathe, milling machine for CNC operation.

8, Input for an external mechanical switch, groove coupler, proximity switches, etc. on the knife.

9, P1-P17 interface board and the computer parallel port signals correspond to the signal pins 1-17, 18-25 parallel port pin to power ground.

10, size : 90mmx70mm,  positioning holes : 80mmx60mm.

 

Package Included:

5 x CNC Two-Phase Stepper Motor Driver Board (5A)

1 x cnc interface board

1 x DB25 Cable

 

How to use CNC interface board:

1.To connect the PC parallel port by the parallel cable of the priter,


2.The power supply input port, can set up the single or double power supply by JN1 an JN2.

 

 JN1&JN2 connected , is the case of the single power , the POWER + and the isolating source will be connected, the GND and the isolating source GND will be connected:  if the JN1&JN2 is open circuit , the POWER + and the isolating source will be cut off, the GND and the isolating source GND will be cut off.

 J4 is the GND and the POWER + of the isolationg source


3.Output connector, 12 wires OC( screw  terminal output.

  


The internal circuit

 

J1 is the contact pin output, as the same as the terminal P2-P7, used to connect the small driver.

 

4.The 5 channel input signal port can be connected to the external mechanical switch, the proximity switch etc.
                  


Through the P10-P15 , it can connect to the sensor and switch, and it can realised the funcition by setting up the software.

 The connection of the mechanical switch.


   

 

payment support:

paypal,Moneybookers,credit card,Bank Transfer,debit cards.

Supplier Details:

Guangzhou Rantion Trading Co., Ltd.

Sales:Mr. haifeng he

Contact Phone:086-020-83262996

Main Products:Car Amplifiers

Business type:Manufacturer, Trading Company, Distributor/Wholesaler

SPONSOR AD

User Reviews: CNC Router/Milling kit 5 axis Two-Phase Stepper Motor Driver + 6 axis CNC interface board #UC120