corrugated metal roofing and siding panels

Price: 1
Brand Name: BLD
Model Number: 0.5
Country/Region: China
Post Date: May 10,2011

Product Description: corrugated metal roofing and siding panels


Corrugated Steel Roofing SheetsCorrugated Metal Roofing – 1 1/4" x 1/4"The slight or small profile of this corrugated profile is often used in decorative applications where strength is not an issue. The panels are offered in almost every type of material, and mostly made to order. The majority of these panels are offered in a 26" wide with 33" in some materials. Primarily only offered in light gauge thickness, since this profile does not carry a heavy loads.  Corrugated Galvanized G-90 – 2 1/2" x 1/2"This corrugated panel primarily comes in a (G-90) galvanized steel, but can also be made in Stainless Steel, Galvalume, Aluminum, and Painted finishes. The material is also offered in a wide variety of gauge thickness from a lighter 24 gauge thru to the heavier 16 gauge. The galvanized sheets are stock in our location in the 27 ½" wide by either, 8', 10', 12' or any size up to 24',custom cut sizes can always be done as well. All other materials such as the Stainless, Aluminum & Galvalume will all have different overall widths but have the same consistent profile of, ½" high & two and a half inches from the peaks of each corrugation.  Corrugated Aluminum Smooth Natural Finish – 2.67" x 7/8"The 2.67" x 7/8" Profile is a panel we stock in either a mill finish or stucco-embossed Aluminum. We also carry this style in a galvalume as well. The deeper grooves in this profile give a more pronounced look and a wavy type of corrugation. Mechanical Metal, Inc. carries this panel, as well most others, in a perforated version as well.  Corrugated 4.2The Deepest wave of all our corrugated curved style panels comes in all materials. Mainly the 42" wide is made in the galvanized and (T304) Stainless Steel, with standard stocking sizes of 8', 10', & 12'. The 4.2" is the distance between each high point in succession to each corrugation. The 4.2 is also offered in wide variety of painted colors. (This is also known as the asbestos replacement panel.)  R-Panel 8 oz. White – 38" x 12"The R-Panel is a very common panel used in both commercial & industrial applications. Typically these panels come in a galvanized and painted finish. This profile is often used and substituted for the Ultra-Rib profile as well. The R-Panel is used as siding and roofing applications.  Ultra Rib Painted WhiteThe Ultra-Rib panel is very attractive panel which can come in a wide array of painted finishes. The lighter gauges (24, 26, 28) have a 36" coverage and come in almost any length. This profile is often interchanged with the R-panel due the similarities in there look. This style of panel is used in all aspects of industry and can be used as a replacement siding.  Roofing and Siding Rib – 7.2"The 7.2 Rib is an economical siding panel the offers a wide scope of use. The distance of 7.2 inches gives an open squared off look that is used on many buildings. This panel comes painted or a galvanized steel.  Box Beam – 5.33"Sometimes referred to as a "Super 4 RIB", this 1 1/2" deep product has an extra bold ribbed appearance. The higher strength characteristics of this box beam can lesson the number of structural steel girts on large tall buildings.  Rib – 4"The 4" Rib is very popular profile that used both as a siding and roofing panel. The 4" Rib is typically ordered as a Mill finish aluminum and Stucco-Embossed finish. The additional strength panel would come in the galvanized finish, with load tables available for all the types of material. Call for other sizes other than the .032 and .040 aluminum, and 18, 20, 22, 24 gauge galvanized finishes. Common uses are warehouse and industrial buildings. If there is a certain material you would like your 4" made to, please call as we do form custom panels.  Rib – 8"The 8" Box-Rib is used in many paper & Pulp plants. This profile has stiffing beads which will minimize any type of canning that can occur with other panels. The painted finish is the primary way this ordered but can also be order as a mill finish in whatever material you choose. All standard gauge thickness and sheet sizes apply when ordering the 8" Rib Panels.  If you are interested with our corrugated sheets, kindly contact us as follow:Tel:86-318-7589165Fax:86-318-7589592Mobile:86-15030879047Att.: Jessica Wang   

Supplier Details:

Anping Chunsheng Hardware Mesh Co., Ltd.

Sales:Ms. Jessica Wang

Contact Phone:86-318-7589162

Main Products:Roof Tiles

Business type:Manufacturer, Distributor/Wholesaler

SPONSOR AD

User Reviews: corrugated metal roofing and siding panels