2011 cheap price and high quality easy car alarm system/car alarm remote control/auto guard car alar

Price: 1
Brand Name: Weltimes
Model Number: CTR04
Country/Region: China
Post Date: Jul 16,2011

Product Description: 2011 cheap price and high quality easy car alarm system/car alarm remote control/auto guard car alar

Mini Car Gps TrackerGSM/GPS/GPRS  Small,Simple & Save your money Special Points1. Build-in GPS antenna and GSM antenna                                                              (optional: also support external GPS & GSM antenna)2. Mini size: 50mm x 45mm x 21mmThe two points above make the tracker easily can be install many place of car even rearview mirror place;make it more like a car accessories in steady of GPS tracker to prevent it to be cut off by car theft. Basic featuresThe size is very small but it has all the functions of other car GPS tracker:1. Remote configure setting via GSM2. Real-time dynamic tracking3. Car location inquiry4. Over speed alert5. Geo-fence alert; Destination alert6. Data Logger7. Mileage accumulation8. SOS alert: Send SOS alert to monitor center (optional)9. 2 way voice communication (optional) & Voice monitor (optional)10. Remote cut oil via GSM (optional)11. Remote cut electricity via GSM (optional)12. Video surveillance (optional)  SpecificationGSM moduleGSM900/18000MHz,GSM850/1900MHz (optional or quad band)GPS chipsetSirfGPS sensibility-159dBmGPS centre frequencyL1, 1575.42MHzGPS Positioning accuracy5-25 meterSpeed precision0.1 Meter/STime precisionSync to GPSDefault dataWGS-84Hot start1SCold start38SMaximum altitude18000MeterMaximum speed515 Meter/SGravity accelerationless than 4g Others Operating temperature-20---65°CHumidity5%---95%Dimensions (mm)50*45*21Voltage12V—24VThe average standby current> 80MALED External SOS alarm switchSOS alert Device Description1. Pins definitionPin1: External power supply: positive input pin: voltage range: DC +6V—+24V.Pin2: External power supply: negative input pin, connect to GNDPin3: Positive output pin control by Relay: voltage +12 V, the process of using non-grounded.Pin4: Negative output pin control by Relay: connect to GND.Pin5: Serial port: to receive data.  (RX data port).Pin6: Serial port: to transmit data.  (TX data port).Pin7: Emergency SOS alarm signal input port, normal, high level, low input activate SOS alarm.Pin8: External state signal input: TA.   Normally is low, high external input indicate incidentPin9: On button input port: normally is high level, low input will activate to turn on unit.Pin10 External input signal reference, connect to GNDPin11 External microphone input port:  positive MIC +.Pin12 External microphone input port:  negative MIC +.Pin13 External battery input: positive BAT +. Input voltage for + 3.6-4.2 V,Input voltage exceed designated areas will likely permanent damage to the machine.Pin14 External battery input:  negative BAT -. Connect to GND 2. Install SIM cardOpen housing and install SIM as photo:  3. Connect wires:  Basic function: Just connect two power pins (Pin1 & Pin2)Optional functions: function 8,9,10,11,12  It need connect relative wires and accessories. 4. Optional accessories: Power cutting relay, SOS switch,MIC Remark:If your company has your own communication protocol, we can develop relevant device software to support.

Supplier Details:

Weltimes (Shenzhen) Technology Co., Ltd.

Sales:Ms. Kiki Wu

Contact Phone:86-755-88849087

Main Products:Navigation & GPS

Business type:Manufacturer